Many ambitious IT professionals want to make further improvements in the IT industry and be closer from the IT peak. They would choose this difficult Juniper certification JN0-343 exam to get certification and gain recognition in IT area. Juniper JN0-343 is very difficult and passing rate is relatively low. But enrolling in the Juniper certification JN0-343 exam is a wise choice, because in today's competitive IT industry, we should constantly upgrade ourselves. However, you can choose many ways to help you pass the exam.
ITCertKing Juniper JN0-343 exam questions are made in accordance with the latest syllabus and the actual Juniper JN0-343 certification exam. We constantly upgrade our training materials, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam. If you still confused to use the training materials of ITCertKing, then you can download part of the examination questions and answers in ITCertKing website. It is free to try, and if it is suitable for you, then go to buy it, to ensure that you will never regret.
Related study materials proved that to pass the Juniper JN0-343 exam certification is very difficult. But do not be afraid, ITCertKing have many IT experts who have plentiful experience. After years of hard work they have created the most advanced Juniper JN0-343 exam training materials. ITCertKing have the best resource provided for you to pass the exam. Does not require much effort, you can get a high score. Choose the ITCertKing's Juniper JN0-343 exam training materials for your exam is very helpful.
When you click into ITCertKing's site, you will see so many people daily enter the website. You can not help but be surprised. In fact, this is normal. ITCertKing is provide different training materials for alot of candidates. They are using our training materials tto pass the exam. This shows that our Juniper JN0-343 exam training materials can really play a role. If you want to buy, then do not miss ITCertKing website, you will be very satisfied.
In this competitive IT industry, having some authentication certificate can help you promote job position. Many companies that take a job promotion or increase salary for you will refer to how many gold content your authentication certificates have. Juniper JN0-343 is a high gold content certification exam. Juniper JN0-343 authentication certificate can meet many IT employees' needs. ITCertKing can provide you with Juniper certification JN0-343 exam targeted training. You can free download ITCertKing's trial version of raining tools and some exercises and answers about Juniper certification JN0-343 exam as a try.
Exam Code: JN0-343
Exam Name: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
One year free update, No help, Full refund!
Total Q&A: 393 Questions and Answers
Last Update: 2013-10-24
JN0-343 Free Demo Download: http://www.itcertking.com/JN0-343_exam.html
NO.1 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper JN0-343 practice test JN0-343 exam prep JN0-343 practice test
NO.2 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper JN0-343 dumps JN0-343 study guide JN0-343 JN0-343 JN0-343 exam
NO.3 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper JN0-343 JN0-343 test questions JN0-343 practice test JN0-343 study guide
NO.4 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper test answers JN0-343 JN0-343 JN0-343
NO.5 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper dumps JN0-343 JN0-343
NO.6 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper JN0-343 JN0-343
NO.7 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 JN0-343 questions JN0-343
NO.8 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper JN0-343 JN0-343 certification JN0-343 exam JN0-343 JN0-343 pdf
NO.9 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper certification training JN0-343 questions JN0-343 JN0-343 JN0-343 braindump JN0-343 exam
NO.10 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper original questions JN0-343 questions JN0-343
NO.11 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper certification JN0-343 questions JN0-343 original questions JN0-343 demo
NO.12 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper JN0-343 exam JN0-343
NO.13 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper test JN0-343 exam JN0-343 answers real questions JN0-343 test JN0-343
NO.14 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper answers real questions JN0-343 exam JN0-343 JN0-343 exam dumps JN0-343 test questions JN0-343 exam prep
NO.15 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper JN0-343 JN0-343 JN0-343
NO.16 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper JN0-343 dumps JN0-343
NO.17 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper JN0-343 exam dumps JN0-343 study guide JN0-343 JN0-343 questions
NO.18 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper study guide JN0-343 original questions JN0-343
NO.19 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper demo JN0-343 study guide JN0-343 test answers JN0-343
NO.20 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper exam prep JN0-343 JN0-343 questions JN0-343 JN0-343 study guide
NO.21 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper test JN0-343 JN0-343
NO.22 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper demo JN0-343 exam prep JN0-343 answers real questions JN0-343 demo JN0-343 certification
NO.23 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper braindump JN0-343 JN0-343 test JN0-343 JN0-343 questions JN0-343 certification
NO.24 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper exam dumps JN0-343 exam simulations JN0-343 certification JN0-343
NO.25 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper certification JN0-343 JN0-343 dumps
NO.26 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper test answers JN0-343 JN0-343 exam prep
NO.27 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper pdf JN0-343 test questions JN0-343 JN0-343 certification training
NO.28 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper JN0-343 JN0-343 JN0-343 practice test JN0-343 JN0-343 exam simulations
NO.29 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper exam JN0-343 certification training JN0-343 certification
NO.30 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper JN0-343 JN0-343 demo
ITCertKing offer the latest 98-372 exam material and high-quality HP2-N43 pdf questions & answers. Our C_TSCM62_65 VCE testing engine and MSC-235 study guide can help you pass the real exam. High-quality 70-489 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/JN0-343_exam.html
没有评论:
发表评论