Juniper certification JN0-303 exam best training materials

If you choose to sign up to participate in Juniper certification JN0-303 exams, you should choose a good learning material or training course to prepare for the examination right now. Because Juniper certification JN0-303 exam is difficult to pass. If you want to pass the exam, you must have a good preparation for the exam.

ITCertKing is a website which always provide you the latest and most accurate information about Juniper certification JN0-303 exam. In order to allow you to safely choose us, you can free download part of the exam practice questions and answers on ITCertKing website as a free try. ITCertKing can ensure you 100% pass Juniper certification JN0-303 exam.

Do you want to pass the Juniper JN0-303 exam better and faster? Then please select the ITCertKing. It can help you achieve your dreams. ITCertKing is a website that provide accurate exam materials for people who want to participate in the IT certification. ITCertKing can help a lot of IT professionals to enhance their career blueprint. Our strength will make you incredible. You can try a part of the questions and answers about Juniper JN0-303 exam to test our reliability.

ITCertKing's expert team has developed a latest short-term effective training scheme for Juniper certification JN0-303 exam, which is a 20 hours of training for the candidates of Juniper certification JN0-303 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass Juniper certification JN0-303 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.

In order to pass Juniper certification JN0-303 exam, selecting the appropriate training tools is very necessary. And professional study materials about Juniper certification JN0-303 exam is a very important part. Our ITCertKing can have a good and quick provide of professional study materials about Juniper certification JN0-303 exam. Our ITCertKing IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same. ITCertKing is a convenient website specifically for people who want to take the certification exams, which can effectively help the candidates to pass the exam.

Exam Code: JN0-303
Exam Name: Juniper (Juniper networks Certified internet specialist.m(jncis-m))
One year free update, No help, Full refund!
Total Q&A: 150 Questions and Answers
Last Update: 2013-10-24

JN0-303 Free Demo Download: http://www.itcertking.com/JN0-303_exam.html

NO.1 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper demo   JN0-303   JN0-303

NO.2 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper test answers   JN0-303   JN0-303   JN0-303 braindump

NO.3 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

Juniper   JN0-303 exam simulations   JN0-303   JN0-303   JN0-303 dumps

NO.4 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper exam prep   JN0-303   JN0-303 pdf

NO.5 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

Juniper study guide   JN0-303 dumps   JN0-303 exam simulations   JN0-303   JN0-303

NO.6 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

Juniper   JN0-303 braindump   JN0-303 certification training

NO.7 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

Juniper certification training   JN0-303 pdf   JN0-303   JN0-303

NO.8 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Juniper exam   JN0-303   JN0-303 exam   JN0-303 pdf   JN0-303 dumps

NO.9 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper questions   JN0-303 exam prep   JN0-303   JN0-303

NO.10 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper test   JN0-303   JN0-303

NO.11 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper questions   JN0-303   JN0-303 exam   JN0-303 test answers   JN0-303 test questions

NO.12 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper   JN0-303   JN0-303 pdf   JN0-303 demo   JN0-303

NO.13 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper   JN0-303 test questions   JN0-303   JN0-303   JN0-303 certification training   JN0-303

NO.14 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

Juniper braindump   JN0-303 demo   JN0-303

NO.15 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper   JN0-303 demo   JN0-303   JN0-303 test questions

NO.16 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper exam dumps   JN0-303   JN0-303   JN0-303 pdf   JN0-303

NO.17 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper study guide   JN0-303   JN0-303

NO.18 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

Juniper test answers   JN0-303 questions   JN0-303   JN0-303 demo   JN0-303

NO.19 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

Juniper   JN0-303 test   JN0-303 certification training   JN0-303 braindump

NO.20 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper   JN0-303   JN0-303 exam simulations

ITCertKing offer the latest 000-225 exam material and high-quality 1z0-599 pdf questions & answers. Our NS0-504 VCE testing engine and C-TSCM62-65 study guide can help you pass the real exam. High-quality 1z0-465 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-303_exam.html