2014年1月14日星期二

Exam JN0-101 questions and answers

ITCertKing can provide a shortcut for you and save you a lot of time and effort. ITCertKing will provide good training tools for your Juniper certification JN0-101 exam and help you pass Juniper certification JN0-101 exam. If you see other websites provide relevant information to the website, you can continue to look down and you will find that in fact the information is mainly derived from our ITCertKing. Our ITCertKing provide the most comprehensive information and update fastest.

ITCertKing Juniper JN0-101 exam questions are made ​​in accordance with the latest syllabus and the actual Juniper JN0-101 certification exam. We constantly upgrade our training materials, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam. If you still confused to use the training materials of ITCertKing, then you can download part of the examination questions and answers in ITCertKing website. It is free to try, and if it is suitable for you, then go to buy it, to ensure that you will never regret.

Exam Code: JN0-101
Exam Name: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)
One year free update, No help, Full refund!
Total Q&A: 190 Questions and Answers
Last Update: 2014-01-14

Are you IT person? Do you want to succeed? If you want to succeed, please do to buy ITCertKing's Juniper JN0-101 exam training materials. Our training materials have through the test of practice. it can help you to pass the IT exam. With the ITCertKing's Juniper JN0-101 exam training materials, you will have better development in the IT industry. You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? ITCertKing's Juniper JN0-101 exam training materials will satisfy your desire. We are through thick and thin with you and to accept this challenge together .

According to the survey, the candidates most want to take Juniper JN0-101 test in the current IT certification exams. Of course, the Juniper JN0-101 certification is a very important exam which has been certified. In addition, the exam qualification can prove that you have high skills. However, like all the exams, Juniper JN0-101 test is also very difficult. To pass the exam is difficult but ITCertKing can help you to get Juniper JN0-101 certification.

JN0-101 Free Demo Download: http://www.itcertking.com/JN0-101_exam.html

NO.1 Which two statements are true about the forwarding table? (Choose two)
A.The forwarding table lists each source protocol and preference for each destination
B.The forwarding table constains only active routes
C.The forwarding table is used to process transit packets
D.The forwarding table is stored in compact flash
Answer: BC

Juniper   JN0-101 certification training   JN0-101   JN0-101

NO.2 You have been asked to create a static route with a next hop that is not directly connected to the
router.Which configuration parameter enables the static route to accomplish this scenario?
A.resolve
B.indirect
C.next-hop
D.recursive
Answer: A

Juniper test   JN0-101   JN0-101

NO.3 Given the configuration and routing table in the exhibit, which routes will be advertised to OSPF
neighbors because of the demo policy?
A.192.168.0.0/16 only
B.192.168.0.0/17 only
C.192.168.50.0/24 and 192.168.51.0/24
D.192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
Answer: D

Juniper study guide   JN0-101   JN0-101   JN0-101   JN0-101

NO.4 Which two statements are true about the rescue configuration file? (Choose two)
A.It must include a root password
B.It is roll back file number 50, and you can recover it by issuing rollback 50
C.It is created by issuing request system configuration rescue save
D.It is updated automatically when you commit
Answer: AC

Juniper demo   JN0-101 braindump   JN0-101   JN0-101

NO.5 Which command do you use to go from the shell prompt to the CLI prompt.?
A.run cli
B.cli
C.start cli
D.edit
Answer: B

Juniper   JN0-101 test answers   JN0-101 practice test   JN0-101 original questions   JN0-101

NO.6 Referring to the exhibit,
which two statements are true? (Choose two)
A.The route 192.168.1.0/25 is accepted
B.The route 192.168.2.0/25 is accepted
C.OSPF routes will be exported into RIP
D.RIP routes will be exported into OSPF
Answer: AD

Juniper dumps   JN0-101   JN0-101   JN0-101

NO.7 Which account is used to access a Junos device in a factory-default configuration?
A.root
B.admin
C.juniper
D.user
Answer: A

Juniper questions   JN0-101   JN0-101   JN0-101 pdf

NO.8 What is the default protocol preference for OSPF internal routes?
A.10
B.15
C.150
D.160
Answer: A

Juniper   JN0-101 certification   JN0-101 dumps   JN0-101 certification training

NO.9 You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100.Which two
achieve this result? (Choose two)
A.set protocols set ospf area 0 set interface so-0/0/0.100
B.set protocols ospf area 0 interface so-0/0/0.100
C.edit protocols ospf interface so-0/0/0.100
D.edit protocols ospf area 0 set interface so-0/0/0.100
Answer: BD

Juniper   JN0-101   JN0-101   JN0-101

NO.10 What must be configured prior to the first commit after factory defaults are loaded?
A.root authentication
B.default gateway
C.hostname
D.management services
Answer: A

Juniper   JN0-101 exam dumps   JN0-101   JN0-101 test questions

NO.11 Which three protocols use UDP as a transport protocol by default? (Choose three)
A.HTTP
B.TFTP
C.DNS
D.SNMP
E.SMTP
Answer: BCD

Juniper   JN0-101 original questions   JN0-101   JN0-101 braindump

NO.12 Given the routing entries shown in the exhibit, which next-hop IP address will be used for the
destination IP address 192.168.1.142? (Assume that only static routes are available for the destination)
A.10.20.106.10
B.10.20.14.131
C.10.18.1.1
D.10.20.14.130
Answer: D

Juniper   JN0-101   JN0-101 test

NO.13 When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
A.snoop
B.tcpdump
C.monitor
D.tail
Answer: C

Juniper questions   JN0-101   JN0-101 demo   JN0-101

NO.14 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command
Which statement is correct?
A.The bypass-routing parameter is used to test the density on the T1 line
B.The bypass-routing parameter cannot be used on a T1 interface
C.The bypass-routing parameter allows you to ping a host through an interface that has no route through
it
D.The bypass-routing parameter allows you to ping a local WAN interface without generating any
outbound traffic
Answer: C

Juniper   JN0-101 exam dumps   JN0-101 demo

NO.15 What is the default import routing for OSPF?
A.Accept all OSPF routes and install them into the 3 routing table
B.Accept all OSPF routes and install them into the inet7.0 routing table
C.Accept all OSPF routes and install them into the inet4.0 routing table
D.Accept all OSPF routes and install them into the inet.0 routing table
Answer: D

Juniper   JN0-101 demo   JN0-101   JN0-101   JN0-101

NO.16 You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have
decided to use a firewall filter.How should you apply the firewall filter?
A.as an outbound filter on interface fxp0
B.as an outbound filter on interface lo0
C.as an inbound filter on interface fxp0
D.as an inbound filter on interface lo0
Answer: D

Juniper answers real questions   JN0-101 test questions   JN0-101   JN0-101 braindump   JN0-101

NO.17 Referring to the exhibit, which type of classifier is being used in this CoS configuration?
[edit fireall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
form {
soruce-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER
}
address 192.168.200.1/24;
}
}
A.behavior aggregate
B.policer
C.multifield
D.forward policy
Answer: C

Juniper dumps   JN0-101   JN0-101   JN0-101 questions   JN0-101   JN0-101 answers real questions

NO.18 What are two valid match criteria for a routing policy? (Choose two)
A.OSPF area ID
B.prefix list
C.port
D.time-to-live (TTL)
Answer: AB

Juniper original questions   JN0-101   JN0-101 original questions   JN0-101   JN0-101 exam prep

NO.19 What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A

Juniper   JN0-101   JN0-101   JN0-101

NO.20 Whitch three user authentication methos are supported by the Junos OS? (Choose three)
A.RADIUS
B.CHAP
C.local user database
D.tacacs+
E.PAP
Answer: ACD

Juniper dumps   JN0-101   JN0-101 answers real questions

ITCertKing offer the latest C_HANAIMP_1 exam material and high-quality 000-400 pdf questions & answers. Our 000-656 VCE testing engine and JK0-U31 study guide can help you pass the real exam. High-quality 000-275 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-101_exam.html

没有评论:

发表评论