Juniper JN0-521 exam pdf dumps

Juniper JN0-521 exam candidates all know the Juniper JN0-521 exam is not easy to pass. But it is also the only way to success, so they have to choose it. In order to improve the value of your career, you must pass this certification exam. The exam questions and answers designed by ITCertKing contain different targeted, and have wide coverage. There is no any other books or other information can transcend it. The question bprovided by ITCertKing definitely ace exam questions and answers that help you pass the exam. The results many people used prove that ITCertKing success rate of up to 100%. ITCertKing is the only way that suits you to pass the exam, choose it equal to create a better future.

ITCertKing website is fully equipped with resources and the questions of Juniper JN0-521 exam, it also includes the Juniper JN0-521 exam practice test. Which can help candidates prepare for the exam and pass the exam. You can download the part of the trial exam questions and answers as a try. ITCertKing provide true and comprehensive exam questions and answers. With our exclusive online Juniper JN0-521 exam training materials, you'll easily through Juniper JN0-521 exam. Our site ensure 100% pass rate.

Juniper certification JN0-521 exam has become a very popular test in the IT industry, but in order to pass the exam you need to spend a lot of time and effort to master relevant IT professional knowledge. In such a time is so precious society, time is money. ITCertKing provide a training scheme for Juniper certification JN0-521 exam, which only needs 20 hours to complete and can help you well consolidate the related IT professional knowledge to let you have a good preparation for your first time to participate in Juniper certification JN0-521 exam.

In ITCertKing's website you can free download study guide, some exercises and answers about Juniper certification JN0-521 exam as an attempt.

Exam Code: JN0-521
Exam Name: Juniper (FWV.Associate (JNCIA-FWV))
One year free update, No help, Full refund!
Total Q&A: 119 Questions and Answers
Last Update: 2013-09-30

Someone asked, where is success? Then I tell you, success is in ITCertKing. Select ITCertKing is to choose success. ITCertKing's Juniper JN0-521 exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, ITCertKing's Juniper JN0-521 exam training materials is get a great response aroud candidates, and to establish a good reputation. This is turn out that select ITCertKing's Juniper JN0-521 exam training materials is to choose success.

JN0-521 Free Demo Download: http://www.itcertking.com/JN0-521_exam.html

NO.1 In the command, save config from tftp 1.1.7.250 abcd.cfg merge, which function does the merge
parameter specify?
A.The config file from the TFTP server will replace the configuration in RAM.
B.The config file from the TFTP server will replace the startup configuration file in internal flash.
C.The merge parameter is not valid for TFTP files, it is only valid for configuration files stored in internal
flash.
D.The config file from the TFTP server will be combined with the configuration file in RAM and the
combined result will be saved in internal flash.
Answer: D

Juniper   JN0-521   JN0-521   JN0-521   JN0-521 dumps

NO.2 Which statement accurately describes the "config rollback" feature?
A.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a previously saved
configuration file from flash.
B.The "config rollback" feature is enabled by default, it allows the administrator to re-apply a previously
saved configuration file from flash.
C.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a locked
configuration file from a separate area in flash.
D.Once the "config rollback" feature is enabled, it allows the administrator to revert to the prior ScreenOS
image or configuration file in the event an upgrade operation aborts.
Answer: C

Juniper   JN0-521 exam prep   JN0-521 answers real questions   JN0-521 dumps

NO.3 In the packet forwarding decision process, how is the second packet handled differently than the first
in a series of allowed interzone packets?
A.The second packet causes an ARP query.
B.The second packet is checked against the policy table.
C.The second packet is forwarded without a sanity check.
D.The second packet is forwarded without checking the route table.
Answer: D

Juniper exam   JN0-521 original questions   JN0-521 test   JN0-521 exam prep

NO.4 When performing an image upgrade using the CLI, which three locations would be a source for this
image? (Choose three.)
A.FTP server
B.TFTP server
C.internal flash
D.PC local disk
E.Compact Flash Card
Answer: BCE

Juniper   JN0-521   JN0-521 certification

NO.5 You are looking at the event log of the responding device and it says,
"Rejected an initial Phase 1 packet from an unrecognized peer gateway"
What are three likely reasons for the failure? (Choose three.)
A.The peer ID is misconfigured.
B.The default gateway is missing.
C.The preshare keys are mismatched.
D.The gateway address is misconfigured.
E.The outgoing interface is misconfigured.
Answer: ADE

Juniper certification   JN0-521 exam prep   JN0-521

NO.6 What will change the root admin password?
A.set admin password
B.set root-admin password
C.set admin password
D.set admin user password
Answer: A

Juniper   JN0-521   JN0-521 demo   JN0-521 exam simulations   JN0-521

NO.7 Which type of NAT is performed when you implement interface-based NAT?
A.source IP address translation
B.destination IP address translation
C.source IP and port address translation
D.destination IP and port address translation
Answer: C

Juniper demo   JN0-521 exam   JN0-521

NO.8 Which command is used when configuring web management on the VLAN1 interface for a client
connected to an e3 interface in the DMZ zone?
A.set int eth3 manage web
B.set zone v1-dmz manage web
C.set int dmz zone manage web
D.set int VLAN1 zone dmz manage web
Answer: B

Juniper   JN0-521 demo   JN0-521

NO.9 By default, where are changes stored when a save command is issued from the CLI during a
management session?
A.NVRAM
B.internal flash
C.PCMCIA card
D.Compact Flash Card
Answer: B

Juniper   JN0-521 certification   JN0-521 exam dumps   JN0-521 exam

NO.10 Click the Exhibit button.
In the exhibit, which interface would be used to forward traffic to host 1.1.7.5?
A.e0/1
B.e0/2
C.e0/3
D.e0/4
Answer: C

Juniper   JN0-521   JN0-521 exam prep

NO.11 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer: D

Juniper   JN0-521 demo   JN0-521 test questions

NO.12 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer: AB

Juniper test answers   JN0-521   JN0-521   JN0-521   JN0-521 pdf

NO.13 Telnet management has been enabled on an interface in the untrust zone.
What else should be completed to limit telnet access to the ScreenOS device from trusted management
PCs?
A.Define a permitted IP address.
B.Define a policy from trust to untrust.
C.Define a trusted IP in the address table.
D.Define a manage IP address on this interface.
Answer: A

Juniper   JN0-521   JN0-521   JN0-521   JN0-521

NO.14 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI
management.
Which sequence of steps must be performed to make the interface operational at the end of the
configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and telnet services.
B.Assign the interface to a zone, define the IP address, accept default management services.
C.Assign the interface to a virtual router, define the IP address, enable Web and telnet services.
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default
management services.
Answer: A

Juniper study guide   JN0-521 test questions   JN0-521 study guide   JN0-521   JN0-521 exam dumps   JN0-521

NO.15 What is the purpose of the "Manage-IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which device is allowed to manage the ScreenOS device.
C.It is the address that an external device uses to gain management access to a ScreenOS device.
D.It defines a list of device addresses that can manage the ScreenOS device without being authenticated
prior to session establishment.
Answer: C

Juniper   JN0-521 questions   JN0-521 certification

NO.16 When changes are made to the running config during a WebUI management session, to what external
hardware component can the changes be saved?
A.FTP server
B.TFTP server
C.PC local disk
D.Compact Flash Card
Answer: C

Juniper   JN0-521 test answers   JN0-521 study guide   JN0-521 test   JN0-521   JN0-521 exam prep

NO.17 Which process describes how an addressed physical interface is moved into a Layer 2 zone?
A.Place the required interface into the VLAN zone.
B.Place the required interface into L2 zones such as V1-Trust, V1-Untrust
C.Remove the interface from the L3 zone such as Trust and place it into a L2 zone such as V1-Trust
D.Remove the address from the interface, remove the interface from the L3 zone, and then place
interface in the L2 zone.
Answer: D

Juniper   JN0-521 study guide   JN0-521 original questions

NO.18 A ScreenOS firewall is running in transparent mode. The firewall receives a packet which has no entry
in its forwarding table.
What will the firewall do?
A.Flood out all ports.
B.Check its route table for interzone destination.
C.Perform a policy lookup to determine the interfaces to which the source address is permitted, and flood
the packet out of those interfaces.
D.Perform a policy lookup to determine the zones to which the source address is permitted, and flood the
packet out the interfaces bound to those zones.
Answer: D

Juniper   JN0-521   JN0-521

NO.19 When managing a ScreenOS device using the WebUI and performing an image upgrade, from which
hardware component will the ScreenOS image be loaded?
A.TFTP server
B.PC local disk
C.internal flash
D.Compact Flash Card
Answer: B

Juniper exam prep   JN0-521   JN0-521   JN0-521

NO.20 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.NVRAM
B.TFTP server
C.internal flash
D.PCMCIA card
Answer: C

Juniper certification   JN0-521 certification   JN0-521   JN0-521

NO.21 A ScreenOS firewall has the correct interfaces addressed and active. A policy is written allowing
interzone FTP traffic from a directly connected client. But the traffic does not cross the firewall from the
client to the server.
What is the most likely problem with the firewall?
A.The ScreenOS firewall has no physical connection to the FTP server.
B.The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C.The ScreenOS firewall does not have a route defined to the FTP servers' subnet.
D.The ScreenOS firewall does not have a route defined to the FTP clients subnet.
Answer: C

Juniper   JN0-521   JN0-521   JN0-521

NO.22 When a firewall receives the first packet in a series, what will it immediately do?
A.Check its route table.
B.Check its session table.
C.Determine if traffic is crossing zones.
D.Verify that it is not malformed or a fragment.
Answer: D

Juniper test answers   JN0-521   JN0-521 practice test   JN0-521

NO.23 An operational firewall needs a configuration loaded and executed while it is passing user data.
Which CLI command will perform this process without interrupting traffic?
A.save config from tftp 1.1.7.250 15June06.cfg to flash
B.save config from tftp 1.1.7.250 15June06.cfg to ram
C.save config from tftp 1.1.7.250 15June06.cfg merge
D.save config from tftp 1.1.7.250 15June06.cfg to flash
Answer: C

Juniper   JN0-521   JN0-521 braindump   JN0-521

NO.24 When configuring a firewall in a critical environment where a local backup configuration is quickly
needed, what should be completed on a periodic basis?
A.Execute exec config rollback.
B.Execute save config to last-known-good.
C.Execute save regularly or create a script that does this.
D.Execute save software from flash to pcmcia .
Answer: B

Juniper exam   JN0-521 pdf   JN0-521

NO.25 Which command would you run to check IPSec Phase 1 active status?
A.get sa
B.get event 427
C.get sa active
D.get ike cookie
Answer: D

Juniper answers real questions   JN0-521   JN0-521 exam prep

NO.26 Which two statements are true in regards to a ScreenOS firewall in transparent mode? (Choose two.)
A.VPNs can terminate to the VLAN1 interface IP address.
B.Static routes must be configured if multiple virtual routers are going to be used.
C.It can be installed in a network without the requirement to reconfigure IP addressing schemes.
D.You must use the console port to manage the device as you cannot manage the device using an
Ethernet port.
Answer: AC

Juniper demo   JN0-521 pdf   JN0-521 exam dumps   JN0-521   JN0-521

NO.27 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer: A

Juniper   JN0-521 pdf   JN0-521   JN0-521 braindump

NO.28 Click the Exhibit button.
In the exhibit, which two forms of address translation would have generated the output shown? (Choose
two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer: BC

Juniper test   JN0-521 test questions   JN0-521 certification training   JN0-521   JN0-521

NO.29 Which statement is correct regarding administrator privileges?
A.Any administrator can change their privileges on an as-needed basis.
B.Administrator privileges can only be established and changed by the root administrator.
C.Administrator privileges can be established and changed by the root and all-privilege administrator.
D.Administrator privileges can only be established by the root and can be changed by the root and
all-privilege administrator.
Answer: B

Juniper   JN0-521   JN0-521   JN0-521   JN0-521

NO.30 Which ScreenOS WebUI button reorders policies?
A.Shift
B.Move
C.Reorder
D.Transfer
Answer: B

Juniper pdf   JN0-521 exam   JN0-521   JN0-521 certification

ITCertKing offer the latest 000-156 exam material and high-quality 3107 pdf questions & answers. Our 648-238 VCE testing engine and 000-283 study guide can help you pass the real exam. High-quality MB6-871 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-521_exam.html