HP0-S32 exam study guide

HP HP0-S32 exam candidates all know the HP HP0-S32 exam is not easy to pass. But it is also the only way to success, so they have to choose it. In order to improve the value of your career, you must pass this certification exam. The exam questions and answers designed by ITCertKing contain different targeted, and have wide coverage. There is no any other books or other information can transcend it. The question bprovided by ITCertKing definitely ace exam questions and answers that help you pass the exam. The results many people used prove that ITCertKing success rate of up to 100%. ITCertKing is the only way that suits you to pass the exam, choose it equal to create a better future.

ITCertKing HP HP0-S32 exam training materials can help you to come true your dreams. Because it contains all the questions of HP HP0-S32 examination. With ITCertKing, you could throw yourself into the exam preparation completely. With high quality training materials by ITCertKing provided, you will certainly pass the exam. ITCertKing can give you a brighter future.

The IT expert team use their knowledge and experience to make out the latest short-term effective training materials. This training materials is helpful to the candidates. It allows you to achieve the desired results in the short term. Especially those who study while working, you can save a lot of time easily. ITCertKing's training materials are the thing which you most wanted.

The exam questions and answers of general HP certification exams are produced by the IT specialist professional experience. ITCertKing just have these IT experts to provide you with practice questions and answers of the exam to help you pass the exam successfully. Our ITCertKing's practice questions and answers have 100% accuracy. Purchasing products of ITCertKing you can easily obtain HP certification and so that you will have a very great improvement in IT area.

ITCertKing is a professional website. It can give each candidate to provide high-quality services, including pre-sales service and after-sales service. If you need ITCertKing's HP HP0-S32 exam training materials, you can use part of our free questions and answers as a trial to sure that it is suitable for you. So you can personally check the quality of the ITCertKing HP HP0-S32 exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. Moreover, we can give you a year of free updates until you pass the exam.

Exam Code: HP0-S32
Exam Name: HP (HP BladeSystem Networking 2011)
One year free update, No help, Full refund!
Total Q&A: 136 Questions and Answers
Last Update: 2013-09-28

Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the HP HP0-S32 exam. I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult. But it does not matter, because I chose ITCertKing's HP HP0-S32 exam training materials. It can help me realize my dream. If you also have a IT dream, quickly put it into reality. Select ITCertKing's HP HP0-S32 exam training materials, and it is absolutely trustworthy.

We all know that in the fiercely competitive IT industry, having some IT authentication certificates is very necessary. IT authentication certificate is a best proof for your IT professional knowledge and experience. HP HP0-S32 is a very important certification exam in the IT industry and passing HP certification HP0-S32 exam is very difficult. But in order to let the job position to improve spending some money to choose a good training institution to help you pass the exam is worthful. ITCertKing's latest training material about HP certification HP0-S32 exam have 95% similarity with the real test. If you use ITCertKing'straining program, you can 100% pass the exam. If you fail the exam, we will give a full refund to you.

HP0-S32 Free Demo Download: http://www.itcertking.com/HP0-S32_exam.html

NO.1 What are Virtual Connect Enterprise Manager features? (Select three.)
A. is licensed per enclosure
B. is licensed with the Virtual Connect Ethernet module
C. is embedded on the Virtual Connect Ethernet module
D. can administer up to 256,000 network addresses
E. can manage a single domain of up to four enclosures
F. can administer up to 16,000 servers
Answer: A, D, F

HP   HP0-S32   HP0-S32   HP0-S32 braindump

NO.2 Which tasks are used to define a vNet for Virtual Connect Ethernet? (Select three.)
A. Assign only one network per server NIC.
B. Assign one or multiple networks per server NIC.
C. Optionally set the native VLAN.
D. Define the server profile.
E. Specify VLAN names/IDs.
F. Select unassigned uplinks.
Answer: A, D, F

HP   HP0-S32   HP0-S32   HP0-S32 dumps

NO.3 You are configuring Virtual Connect Flex-10 10Gb Ethernet modules with Flex-10 server adapters.
What is an important network design consideration?
A. The Virtual Connect Flex-10 10Gb Ethernet module does not enforce VLAN isolation between
FlexNICs of the same server LAN on Motherboard (LOM).
B. If the Flex-10 server adapters are implemented as mezzanine cards, the Virtual Connect Flex-10 10Gb
Ethernet module requires all FlexNICs be configured for the same speed.
C. The Virtual Connect Manager will enforce physical port isolation by not allowing FlexNICs of the same
server port to connect to the same Virtual Connect network.
D. LACP trunking is not allowed between Virtual Connect uplink ports and infrastructure switch ports
located on different modules, even if within the same physical switch.
Answer: C

HP   HP0-S32 study guide   HP0-S32

NO.4 Which port is the lowest-cost path to the spanning tree root bridge?
A. root port
B. defined root port
C. designated port
D. forwarding port
Answer: A

HP answers real questions   HP0-S32 exam dumps   HP0-S32   HP0-S32   HP0-S32 test answers   HP0-S32

NO.5 Which spanning tree protocol is the most appropriate in a VLAN-aware, non-proprietary network
implementation?
A. RSTP
B. PVST+
C. MSTP
D. STP
Answer: C

HP   HP0-S32 questions   HP0-S32   HP0-S32 test

NO.6 The IEEE 802.1AX (802.3ad) Link Aggregation Control Protocol is a Layer 2 protocol. What is its
function?
A. dynamically identifies link speeds regardless of media type
B. forms port trunks consisting of two or more uplink ports
C. identifies the VLAN to which frames transmitted on a link or port trunk belong
D. advertises information that describes and identifies devices
Answer: B

HP answers real questions   HP0-S32   HP0-S32   HP0-S32 certification   HP0-S32   HP0-S32

NO.7 What are valid reasons for implementing VLANs? (Select two.)
A. to segregate traffic by resource or application needs
B. to provide enhanced name resolution
C. to reduce subnet cost options
D. to minimize the effect of broadcast traffic on hosts
E. to support multipathing
Answer: A, D

HP answers real questions   HP0-S32 demo   HP0-S32   HP0-S32   HP0-S32 exam prep   HP0-S32

NO.8 Which is a unique feature of a virtual switch?
A. port mirroring for packet analysis
B. VLAN segmentation at the port level
C. no packet forwarding (routing) between VLANs
D. maximum of 1016 ports per switch
Answer: D

HP study guide   HP0-S32   HP0-S32   HP0-S32 certification training   HP0-S32   HP0-S32 test questions

NO.9 What does N_Port ID virtualization do?
A. provides an abstraction layer between the server HBAs and the SAN
B. provides interoperability among third-party SAN device manufacturers
C. provides connectivity between the Virtual Connect module and the Onboard Administrator
D. enables a single HBA port to register multiple, unique WWNs within a fabric
Answer: D

HP   HP0-S32   HP0-S32 exam prep   HP0-S32   HP0-S32 demo

NO.10 What are valid FlexNIC bandwidth selections? (Select three.)
A. Preferred
B. Assigned
C. Static
D. Custom
E. Dynamic
F. Auto
Answer: A, D, F

HP study guide   HP0-S32   HP0-S32   HP0-S32   HP0-S32 exam dumps

NO.11 What is considered a Virtual Connect domain in Virtual Connect Enterprise Manager?
A. a maximum of 1,000 enclosures
B. a maximum of 16,000 servers
C. from 1 to 4 enclosures
D. 250 Virtual Connect Manager domains
Answer: C

HP test questions   HP0-S32   HP0-S32 braindump   HP0-S32 test answers   HP0-S32

NO.12 In a switching environment with redundant links, which technology is required for proper operation?
A. VLANs
B. Cisco vPC
C. loop prevention
D. dynamic routing
Answer: C

HP   HP0-S32   HP0-S32 exam simulations   HP0-S32

NO.13 Which statements are true about port VLAN memberships? (Select three.)
A. A port can be an untagged member of multiple VLANs.
B. A port must be a member of at least one VLAN.
C. A port must be a tagged member of only one VLAN.
D. A port can be an untagged member of only one VLAN.
E. A port can be a tagged member of multiple VLANs.
F. A port can be a tagged member of one VLAN and an untagged member of multiple VLANs.
Answer: B, D, E

HP dumps   HP0-S32   HP0-S32   HP0-S32   HP0-S32 test answers

NO.14 What is considered a trunk in a Cisco switching environment?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: B

HP   HP0-S32 certification training   HP0-S32   HP0-S32 questions

NO.15 How can a tagged packet be processed for QoS when it is received on an inbound interface? (Select
three.)
A. The marked priority level can be changed to enforce predetermined classification levels.
B. The packet can be scheduled for a queue based on the marked 802.1p priority level.
C. The packet can be moved to a more secure VLAN and its priority remarked.
D. The packet can be scheduled for a queue based on a preset policy.
E. The packet can be discarded or rerouted if it does not match a set policy.
F. The packet can be prevented switch traversal for a predetermined penalty period.
Answer: A, B, D

HP   HP0-S32 certification training   HP0-S32   HP0-S32 answers real questions   HP0-S32

NO.16 What are the requirements for link aggregation using LACP? (Select three.)
A. Links must have the same tagged VLANs assigned.
B. Links must be the same speed.
C. Links must use the same media type.
D. Links must share a boundary.
E. Links must be full-duplex.
F. Links must be fiber connections.
Answer: B, D, E

HP test   HP0-S32 demo   HP0-S32 exam prep   HP0-S32

NO.17 What does trunk refer to in industry-standard terminology?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: A

HP pdf   HP0-S32   HP0-S32   HP0-S32   HP0-S32   HP0-S32 test answers

NO.18 Which industry-standard protocols are supported on Virtual Connect Ethernet uplinks? (Select three.)
A. IEEE 802.1 AX (802.3ad) Link Layer Discovery Protocol (LLDP)
B. IEEE 802.1w-2001 Rapid Spanning Tree (RSTP)
C. IEEE 802.1p Quality of Service (QoS)
D. IEEE 802.1 AX (802.3ad) Link Aggregation Protocol
E. IEEE 802.1Q VLAN tagging
F. IEEE 802.3af-2003 Power over Ethernet (PoE)
Answer: A, D, E

HP   HP0-S32   HP0-S32 answers real questions   HP0-S32

NO.19 On a Cisco switch, what does the portfast setting do?
A. eliminates auto-negotiation delays with 10GbE ports
B. ensures the link is at maximum speed regardless of configuration
C. causes BPDUs to be blocked if sensed
D. eliminates delays inherent in RSTP/MSTP synchronization
Answer: D

HP certification training   HP0-S32   HP0-S32   HP0-S32

NO.20 What is used to achieve Fibre Channel data transfer?
A. channel mesh
B. packets
C. tunnels
D. frames
Answer: D

HP certification training   HP0-S32 demo   HP0-S32   HP0-S32   HP0-S32

ITCertKing offer the latest 642-997 exam material and high-quality 70-461 pdf questions & answers. Our JN0-730 VCE testing engine and 1z0-599 study guide can help you pass the real exam. High-quality CAT-500 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/HP0-S32_exam.html