Best Citrix 1Y0-A28 exam questions and answers

Now there are many IT training institutions which can provide you with Citrix certification 1Y0-A28 exam related training material, but usually through these website examinees do not gain detailed material. Because the materials they provide are specialized for Citrix certification 1Y0-A28 exam, so they didn't attract the examinee's attention.

ITCertKing Citrix 1Y0-A28 exam training materials have the best price value. Compared to many others training materials, ITCertKing's Citrix 1Y0-A28 exam training materials are the best. If you need IT exam training materials, if you do not choose ITCertKing's Citrix 1Y0-A28 exam training materials, you will regret forever. Select ITCertKing's Citrix 1Y0-A28 exam training materials, you will benefit from it last a lifetime.

We should use the most relaxed attitude to face all difficulties. Although Citrix 1Y0-A28 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because ITCertKing's Citrix 1Y0-A28 exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. ITCertKing's Citrix 1Y0-A28 exam training materials is the best medicine for candidates.

If you don't purchase any course, although you spend a lot of time and effort to review of knowledge to prepare for Citrix certification 1Y0-A28 exam, it is still risky for you to pass the exam. But selecting ITCertKing's products allows you to spend a small amount of money and time and safely pass the exam. I believe that ITCertKing is more suitable for your choice in the society where time is so valuable. Moreover, our ITCertKing a distinct website which can give you a guarantee among many similar sites. Choosing ITCertKing is equivalent to choose success.

Exam Code: 1Y0-A28
Exam Name: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
One year free update, No help, Full refund!
Total Q&A: 123 Questions and Answers
Last Update: 2013-12-24

1Y0-A28 Free Demo Download: http://www.itcertking.com/1Y0-A28_exam.html

NO.1 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B

Citrix exam simulations   1Y0-A28   1Y0-A28   1Y0-A28 exam dumps   1Y0-A28 exam simulations

NO.2 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B

Citrix exam dumps   1Y0-A28 exam dumps   1Y0-A28   1Y0-A28   1Y0-A28
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix   1Y0-A28 exam simulations   1Y0-A28   1Y0-A28
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix   1Y0-A28 questions   1Y0-A28 practice test   1Y0-A28 dumps   1Y0-A28
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix exam prep   1Y0-A28 exam dumps   1Y0-A28 demo   1Y0-A28   1Y0-A28   1Y0-A28 certification training
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix certification training   1Y0-A28 test questions   1Y0-A28
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B

Citrix test questions   1Y0-A28 questions   1Y0-A28 answers real questions
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C

Citrix questions   1Y0-A28   1Y0-A28   1Y0-A28 dumps   1Y0-A28
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix   1Y0-A28   1Y0-A28 certification

NO.3 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix exam prep   1Y0-A28   1Y0-A28 questions   1Y0-A28 test questions

NO.4 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B

Citrix   1Y0-A28   1Y0-A28   1Y0-A28 braindump   1Y0-A28

NO.5 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C

Citrix questions   1Y0-A28   1Y0-A28 test   1Y0-A28 certification   1Y0-A28

ITCertKing offer the latest 70-463 exam material and high-quality C_HANAIMP_1 pdf questions & answers. Our 1Y0-A26 VCE testing engine and MB6-870 study guide can help you pass the real exam. High-quality 000-400 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/1Y0-A28_exam.html